Customisable Parametric Wall Clock

Designer

smackie39

Designer relation

Ingen

Kategori

Decor

Licens

Creative Commons Attribution NonCommercial ShareAlike Creative Commons - Attribution - Non-Commercial - Share Alike

$ ↺ SA

Attribution påkrævet; kommerciel brug er ikke tilladt; ShareAlike gælder for afledte værker.

Designer commercial

None

Først set

2026-09-14 19:50

Sidst set

2026-09-16 20:20

Tags

clock customisable customizable openscad parametric scad wall

Beskrivelse

An OpenSCAD generator for a customisable wall clock. Will suit most battery bowered clockwork mechanisms. Customisable parameters include: Clock diameter Face thickness Numbers font Numbers thickness Spindle diameter Optional recess for spindle nut Hour and minute marks - separate length, width and thicknesses Optional customisable recess for clockwork mechanism and hanger Optional separate customisable hanger recess at the top of the rear side Remixed from standard wall clock by @Wildjoker https://www.printables.com/model/107734-standard-clock-parametric Changes include: Customisable font Customisable Numbers thickness Persistent selectable markings even with zero thickness Optional recess for spindle nut Hour and minute marks - separate width and thicknesses Optional customisable recess for clockwork mechanism and hanger Optional separate customisable hanger recess at the top of the rear side When thicknesses are set to zero you can still select all markings in your slicer in order to paint fill. Alternatively, set a filament change by layer (this method is used in the 3MF). If you use the optional hanger be careful with supports as they can be difficult to remove with small holes with a large pocket.