Parametric Cable Organizer – Screw-Mounted Multi Cable Clip

Designer

Rapid3d4service

Designer relation

Ingen

Kategori

Gadgets

Licens

Creative Commons Attribution ShareAlike Creative Commons - Attribution - Share Alike

$ ↺ SA

Attribution påkrævet; afledte værker skal deles under kompatibel ShareAlike-licens.

Designer commercial

None

Først set

2026-09-14 19:50

Sidst set

2026-09-17 08:20

Tags

cable holder customizable parametric USB Holder Workstation

Beskrivelse

Keep desk cables separated and easier to trace with a configurable multi-clip cable holder. The design uses a flat mounting rail with individual slotted cable channels. Mount it to a suitable panel and route one cable through each clip. The slots allow sideways insertion, so cable connectors do not need to pass through the openings. Use it for a tidy USB cable arrangement behind a desk, peripheral cable routing or organizing leads on a hobby workstation. CUSTOMIZE ONLINE Change the cable diameter, clip count, screw-hole diameter and wall thickness directly in your browser. Use the interactive 3D preview to inspect your custom configuration before downloading or ordering. Open the generator: https://www.buildyour3d.com/en/product/kabelhalter The external configurator offers paid custom STL downloads and printed-part ordering. No CAD installation is needed to configure the model. FIT AND MOUNTING Measure the outside diameter of your cables and check the fit with a small test print. Avoid forcing a thick cable into an undersized clip. Choose screws suitable for the mounting surface and leave slack near connectors.