Sleepy Cat - Table Lamp

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-09-15 08:05

Sidst set

2026-09-18 08:05

Tags

halloween lamp cat pumpkin lamp black cat lamp sleeping cat lamp jack-o-lantern lamp halloween table light hidden face lamp printable halloween lamp STL halloween FDM halloween luminária de halloween gato preto halloween abóbora com gato luminária gato decoração halloween luminária de mesa halloween lámpara halloween lámpara gato calabaza gato negro halloween calabaza con gato decoración halloween lámpara de mesa halloween spooky cat lamp gatinho halloween gato dormindo abóbora

Beskrivelse

3D MODEL DESCRIPTION A black cat curled up on a pumpkin, looking perfectly innocent in the dark. Turn the light on and the pumpkin reveals its haunted face underneath. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 08 Hours 19 Minutes* (may vary according to your printer model) Multiparts - 10 Hours 07 Minutes* (may vary according to your printer model) Multicolor - 01 Day, 02 Hours01 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 12 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. ATTENTION : “ Multipart” files requires super glue. YOU WILL NEED: Bambu LED Kit - Amazon - Aliexpress - Bambu Candle LED - Amazon - Aliexpress - Mercado Livre Led G9 - Amazon - Aliexpress - Mercado Livre Socket G9 - Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 4. - Recommended Infill (%): 1% (Concentric) - Needs Support: Yes. Manual Normal Snug. - Build Plate Adhesion: Yes. Ear brim. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!