Skeleton Stand

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 20:41

Tags

human skeleton STL full scale skeleton 3D print printable skeleton model anatomy model STL educational skeleton print FDM skeleton skeleton with stand STL skeleton stand 3D print human skeleton FDM anatomical model printable esqueleto humano STL esqueleto em tamanho real modelo anatômico imprimível esqueleto 3D impressão FDM esqueleto esqueleto com suporte STL modelo educacional esqueleto esqueleto humano impresso anatomia humana STL modelo de esqueleto completo

Beskrivelse

3D MODEL DESCRIPTION A stand made for a full-scale printable human skeleton. It holds our clinical reference model for any study space. - This STL file is recommended for FDM Printers! - 3D Printing Time : Multiparts Base Stand - 12 Hours, 28 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors) - A pproximately Height: 150 cm (Assembled Files) * Note : Printing time based on a Bambu P1S printer, according to our tests. ATTENTION : “ Multipart” files requires super glue. You Will Need: A broomstick or handle that is 23 mm wide and approximately 150 mm tall. Use the “Lock” files that best matches the measurements you found in your area. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.16 mm - Recommended Layer Height: 0.16 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 10% (Gyroid) - Needs Support: No. - Build Plate Adhesion: Yes, (Brim) only on parts that don't adhere well to the print bed, for some files, you can also use “Painted Brim.” The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!