Modern Grid - Wall Hangers

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-17 10:32

Sidst set

2026-07-19 08:05

Tags

wall hooks print in place printable wall hangers FDM wall hooks print in place hooks architectural wall hooks minimal wall hangers coat hooks printable key hooks wall ganchos de parede cabides de parede impressos ganchos print in place porta-casacos parede ganchos decorativos ganchos minimalistas STL wall hooks maker wall organizer

Beskrivelse

3D MODEL DESCRIPTION Print-in-place wall hooks with a structured, architectural look that blends into any wall without looking like a hardware store solution. Ready to hang straight off the print bed. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 05 Hours 59 Minutes* (may vary according to your printer model) - Approximately Height: 2 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!