Grumpy Kitty - Planter

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-12 21:09

Sidst set

2026-07-19 08:05

Tags

cat planter cat pot grumpy cat planter moving eyes planter water level indicator planter reactive planter animated planter gato vaso vaso de gato vaso com olhos vaso indicador de água vaso com movimento vaso interativo vaso reativo vaso criativo vaso engraçado vaso personalidade 3d printed planter printable planter plant pot indoor plant pot funny planter cute planter cat lover gift presente para amante de gatos vaso impresso 3d planta de interior vaso para suculentas succulent planter succulent pot

Beskrivelse

3D MODEL DESCRIPTION When the water runs low, the eyes shift and the cat lets you know it's not happy about it. It's a planter that judges you, and honestly that might be the only reminder that actually works. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 10 Hours, 43 Minutes* (may vary according to your printer model) Multiparts - 10 Hours, 38 Minutes* (may vary according to your printer model) Multicolor - 15 Hours, 05 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 14 cm * Note : Printing time based on a Bambu P1S printer, according to our tests. ATTENTION : “MULTIPART” files requires glue. You Will Need: Water Wick 03/04 mm - Amazon - AliExpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 10% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!