Brew Spin - Pod Dispenser

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-15 08:10

Sidst set

2026-07-19 08:05

Tags

spinning capsule rack rotating capsule dispenser rotating pod holder capsule carousel universal capsule dispenser universal pod holder coffee capsule rack nespresso rack coffee pod rack rotating coffee organizer coffee station organizer coffee accessories kitchen organizer countertop coffee storage carrossel porta-cápsulas dispenser giratório porta-cápsulas giratório suporte giratório para cápsulas organizador de cápsulas giratório cápsulas universal suporte universal para cápsulas acessórios para café cantinho do café organização cozinha dispenser de café

Beskrivelse

3D MODEL DESCRIPTION A rotating rack that holds 2 sizes of pods and fits into any counter setup. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 06 Hours 58 Minutes* (may vary according to your printer model) - Approximately Height (assembled): 25,5 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Note: Holds 16 standard Dolce Gusto capsules and 20 standard Nespresso capsules. ATTENTION : requires super glue. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: Brim, only in “rail” file. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!