Wowza Mega Dumplin' - Twister

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-12 21:09

Sidst set

2026-07-19 08:05

Tags

dumpling fidget twister fidget twister bao twister surprised dumpling big dumpling dumpling toy surprise dumpling dumpling blind box 3d printed fidget twister toy spinning fidget sensory toy asian toy cute dumpling desk toy gyoza fidget gyoza toy gyoza surpresa bolinho chocado bolinho surpresa brinquedo fidget twister fidget giratório gyoza personagem brinquedo surpresa caixinha surpresa brinquedo impresso 3d fidget sensorial boneco gyoza bolinho grande brinquedo giratório

Beskrivelse

3D MODEL DESCRIPTION Something surprised this big dumpling and now it cannot stop spinning. The twister format makes every little discovery feel like a mini reveal. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor Big - 01 Day, 06 Hours, 06 Minutes* (may vary according to your printer model) Multicolor Big - 01 Day, 15 Hours, 33 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 05 colors) - Approximately Height: Big - 10 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. You Will Need: Rings Key Chain - 1x - Amazon - Aliexpress - Mercado Livre Rings Connector - 1x - Amazon - Aliexpress - Mercado Livre ATTENTION : This files requires super glue. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.12 mm - Recommended Layer Height: 0.12 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: Yes, (Painted Grid) only in “Body” and “Basket Up/Up Keychain” files. - Build Plate Adhesion: No. - Others: You will need to apply supports only to the internal bridge of the “Body” file and the top and bottom “Basket” files. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!