Rib Cage, Spine & Pelvis

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 20:41

Tags

rib cage STL vertebral column STL pelvis STL rib cage 3D print spine 3D print printable skeleton anatomy human thorax STL pelvis anatomy model vertebrae 3D print rib bones STL thoracic anatomy model spine and pelvis STL skeletal anatomy STL anatomy study model FDM anatomy model printable human skeleton medical anatomy STL caixa torácica STL coluna vertebral STL pelve STL costelas 3D coluna 3D modelo anatômico imprimível modelo de costelas imprimível modelo de coluna imprimível modelo de pelve imprimível anatomia da coluna anatomia torácica 3D vértebras 3D tórax humano STL ossos do tórax STL coluna e pelve STL anatomia do esqueleto modelo anatômico FDM esqueleto humano STL impressão FDM anatomia modelo de estudo anatômico

Beskrivelse

3D MODEL DESCRIPTION An anatomically accurate model of the rib cage, spine, and pelvis, with every rib, vertebra, and joint connection carefully recreated. An excellent study piece for understanding posture, movement, thoracic anatomy, and the structural framework that supports and protects the human body. - This STL file is recommended for FDM Printers! - 3D Printing Time : Multiparts - 03 Day, 09 Hours, 55 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 01 colors) - A pproximately Height: 78 cm (Assembled Files) * Note : Printing time based on a Bambu P1S printer, according to our tests. ATTENTION : “ Multipart” files requires super glue. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.16 mm - Recommended Layer Height: 0.16 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Grid) - Needs Support: Yes, (Snug Auto) you can use the “Paint Tool” to add or remove the support. - Build Plate Adhesion: Yes, (Brim) only on parts that don't adhere well to the print bed, for some files, you can also use “Painted Brim.” - Others: You can also use the “Support Tool” for some parts, since some are too tall and might fall over during printing. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!