Grid Gacha

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-09-14 20:48

Sidst set

2026-09-15 04:05

Tags

gacha machine two tone gacha dual color gacha multi color 3D print gacha STL capsule toy machine printable gacha gacha 3D print two part gacha gacha multicolor máquina gacha gacha bicolor gacha duas cores gacha dois filamentos impressão 3D bicolor máquina de cápsulas gacha imprimível gacha multicolorida gacha dois tons máquina gacha bicolor gacha imprimible gacha dos colores máquina de cápsulas imprimible impresión 3D bicolor dispensador gacha bicolor

Beskrivelse

3D MODEL DESCRIPTION A two-part build with a clean look that invites two-color prints. It works great and looks even better when you play with filament contrast. - This STL file is recommended for FDM Printers! - 3D Printing Time : Multiparts - 01 Day 12 Hours 51 Minutes* (may vary according to your printer model) - Approximately Height (assembled): 33 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. ATTENTION : Requires super glue. Will you need; Plastic Capsule Toy 2'' - Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 10% (Gyroid) - Needs Support: No. - Build Plate Adhesion: Yes, in parts with low build plate adhesion. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!