Spiral Drop Gacha

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-09-14 19:50

Sidst set

2026-09-15 00:05

Tags

gacha machine spiral gacha gacha slide gacha with slide capsule toy machine spiral capsule dispenser gacha STL printable gacha gacha 3D print toboggan gacha crank gacha gacha tower máquina gacha gacha espiral gacha com tobogã máquina de cápsulas gacha imprimível dispensador espiral gacha com rampa torre gacha impressão 3D gacha máquina gacha espiral gacha imprimible dispensador espiral de cápsulas gacha con tobogán juguete gacha imprimible máquina de cápsulas imprimible

Beskrivelse

3D MODEL DESCRIPTION The capsule takes the scenic route: this gacha machine sends it down a full spiral slide before it lands in your hands. More fun per dispense. - This STL file is recommended for FDM Printers! - 3D Printing Time : Multiparts - 02 Days 06 Hours 56 Minutes* (may vary according to your printer model) - Approximately Height (assembled): 52 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. ATTENTION : Requires super glue. Will you need; Plastic Capsule Toy 2'' - Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 10% (Gyroid) - Needs Support: Yes, only in the “Slides” files. - Build Plate Adhesion: Yes, in parts with low build plate adhesion. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!