Possessed Pumpkin - Candy Bowl

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-09-14 19:50

Sidst set

2026-09-14 20:47

Tags

halloween candy bowl pumpkin candy bowl jack-o-lantern candy bowl halloween treat bowl surprise mechanism halloween ghost popup halloween 3D printed candy bowl printable halloween candy bowl halloween interactive decoration tigela de doces halloween abóbora decorativa halloween mecanismo surpresa halloween fantasma halloween porta-doces halloween dulcero halloween calabaza dulcero mecanismo sorpresa halloween cuenco de dulces halloween STL halloween candy FDM halloween bowl

Beskrivelse

3D MODEL DESCRIPTION Open the lid and the pupils vanish as a ghost rises from inside. It is a candy bowl that earns its own jumpscare. Trick-or-treaters will not see it coming. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 17 Hours, 12 Minutes* (may vary according to your printer model) Multiparts - 17 Hours, 10 Minutes* (may vary according to your printer model) Multicolor - 01 Day, 06 Hours, 39 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 17 x 17 x 15 cm (Assembled Files) * Note : Printing time based on a Bambu P1S printer, according to our tests. You Will Need: 4x - Neodymium Magnetic - 8x3 - Amazon - AliExpress - Mercado Livre ATTENTION : “ Multipart” files requires super glue. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.16 mm - Recommended Layer Height: 0.16 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: Yes, (Manual Snug) only in “Head” and “Top Head” files. - Build Plate Adhesion: No. - Others: Use (Concentric) at the top of the layer to achieve a better finish. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!