Love Bat

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-09-14 19:50

Sidst set

2026-09-15 00:05

Tags

bat keychain bat STL articulated bat magnetic wings bat printable keychain bat toy blind box bat 3D printed keychain FDM keychain cute bat love bat heart bat morcego chaveiro morcego articulado morcego apaixonado chaveiro impresso chaveiro 3D brinquedo impresso arquivo STL chaveiro asa magnética morcego coração llavero murciélago murciélago articulado murciélago enamorado llavero impreso 3D juguete murciélago alas magnéticas STL llavero caja sorpresa impresa murciélago corazón

Beskrivelse

3D MODEL DESCRIPTION A bat that wears its heart on its... hands. Pop it on your keychain and let people wonder what's hiding inside those wings. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 01 Hours, 21 Minutes* (may vary according to your printer model) Multiparts - 01 Hours, 30 Minutes* ( may vary according to your printer model) Multicolor - 06 Hours, 16 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 16 x 08 x 02 cm (Assembled Files) * Note : Printing time based on a Bambu P1S printer, according to our tests. ATTENTION : “ Multipart” files requires super glue. You Will Need: Ring with Chain 25mm - 1x - Amazon - AliExpress - Mercado Livre Ring 12mm - 1x - Amazon - AliExpress - Mercado Livre Neodymium 5x2 - 2x - Amazon - AliExpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.16 mm - Recommended Layer Height: 0.16 mm, You can use (Concentric) in base layer and a top layer for a better finish files. - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. but use (Brim) If your print bed has poor adhesion. - Others: You can use a more optimized profile to print this drop. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!