Showcase Vending Machine

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-09-14 19:50

Sidst set

2026-09-15 00:05

Tags

vending machine toy vending machine capsule vending machine mini vending machine printable vending machine vending machine STL vending machine 3D print toy dispenser prize machine display vending machine showcase vending machine gacha vending vending machine with display miniatura máquina expendedora máquina de venda máquina de brinquedo vitrine vending vending machine imprimível dispensador de brinquedos vending machine decorativa máquina expendedora máquina expendedora imprimible dispensador de juguetes máquina de juguetes imprimible mini expendedora 3D máquina expendedora con vitrina expendedora con exhibidor

Beskrivelse

3D MODEL DESCRIPTION A vending machine with open display shelves so the prizes are always visible. Turn the crank, pick your reward, feel like a kid again. - This STL file is recommended for FDM Printers! - 3D Printing Time : Showcase Display Multiparts - 01 Day 03 Hours 00 Minutes* (may vary according to your printer model) Showcase Hidden Surprise Multiparts - 23 Hours 08 Minutes* (may vary according to your printer model) - Approximately Height (assembled): 18 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. You will need; Candle LED: Amazon - Aliexpress - Mercado Livre (You need to remove the candle top cap.) Orthodontic Elastics 3/8 Heavy: Amazon - Aliexpress - Mercado Livre Plastic Capsule Toy 2'' - Amazon - Aliexpress - Mercado Livre Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 10% (Gyroid) - Needs Support: No. - Build Plate Adhesion: Ear Brim, to avoid warp. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!