Reaper Surprise

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-09-14 19:50

Sidst set

2026-09-15 00:05

Tags

grim reaper articulated grim reaper STL mini reaper figure halloween death figure printable FDM ceifador articulado miniatura morte halloween impressão 3D boneco ceifeiro articulado parca articulada halloween figura muerte articulada miniatura parca imprimible halloween STL FDM mini articulated figure figura articulada halloween figurita halloween imprimible mystery box halloween caixinha surpresa halloween cajita sorpresa halloween pumpkin box STL abóbora caixinha impressão 3D calabaza caja imprimible FDM halloween figures figuras halloween FDM figuritas FDM halloween

Beskrivelse

3D MODEL DESCRIPTION The inevitable, now in pocket size. This articulated grim reaper hides inside a pumpkin and arrives with his scythe and all the drama the occasion demands. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 24 Minutes* (may vary according to your printer model) Multicolor - 03 Hours 04 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 4.5 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Considering only one of the two available versions (keychain and figurine) Will you need; Split Key Ring with Chain - Amazon - Aliexpress - Mercado Livre Ring Conector 12 mm - Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. Pumpkin Mystery Box 3D MODEL DESCRIPTION - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 02 Hours 44 Minutes* (may vary according to your printer model) Multicolor - 11 Hours 14 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 5.5 cm ATTENTTION: Use the print settings described below. Also, reduce the print speed by 50% by selecting the corresponding option directly on your equipment's control interface. Follow this recommendation to ensure a successful print. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 50mm/s Initial Layer / 50mm/s Initial Layer Infill | 60 mm/s Outer Wall | 150mm/s Inner Wall | 200 mm/s Sparse Infill | 200 mm/s Internal Solid Infill | 150 mm/s Top Surface - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!