Ace Pidgeon

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 12:20

Tags

articulated pigeon keychain pigeon STL keychain pigeon with pilot helmet STL mini pigeon 3D print FDM keychain STL aviator pigeon keychain moving goggles STL printable pigeon keychain funny bird keychain STL mini articulated animal STL tiny pigeon print pilot bird keychain pigeon fidget keychain chaveiro pombo articulado pombo aviador STL mini pombo imprimível chaveiro articulado pombo pombo articulado FDM óculos de aviador móvel STL brinquedo pombo articulado arquivo STL chaveiro pombo pombo piloto imprimível miniatura pombo articulado chaveiro passarinho engraçado

Beskrivelse

3D MODEL DESCRIPTION A pigeon in a pilot helmet, ready for takeoff from your keyring. The goggles move, the attitude is permanent, and yes, it will make people smile every single time. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 4 2 Minutes* (may vary according to your printer model) Multicolor - 07 Hours 22 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 4,5 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Time considering only one version, between the two available (keychain and figurine) You will need; Split Key Ring with Chain: Amazon - Aliexpress - Mercado Livre Ring Conector 12 mm: Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!