Deep Diver

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 12:20

Tags

articulated octopus keychain octopus STL keychain octopus with snorkel STL mini octopus 3D print FDM keychain STL octopus fidget keychain snorkel mask STL printable octopus keychain mini articulated animal STL tiny octopus print underwater animal keychain funny octopus keychain moving snorkel STL chaveiro polvo articulado polvo com snorkel STL mini polvo imprimível chaveiro articulado polvo polvo articulado FDM snorkel móvel STL brinquedo polvo articulado arquivo STL chaveiro polvo polvo mergulhador imprimível miniatura polvo articulado chaveiro animal fundo do mar

Beskrivelse

3D MODEL DESCRIPTION A tiny octopus geared up for the deep end, snorkel and all. The mask moves, the tentacles flex, and the whole thing fits on a keyring without taking up any space it doesn't deserve. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 51 Minutes* (may vary according to your printer model) Multicolor - 05 Hours 48 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 03 colors) - Approximately Height: 3,5 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Time considering only one version, between the two available (keychain and figurine) You will need; Split Key Ring with Chain: Amazon - Aliexpress - Mercado Livre Ring Conector 12 mm: Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!