Sir Dragon

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 12:20

Tags

articulated dragon keychain dragon keychain STL mini dragon STL articulated mini keychain knight helmet dragon dragon with visor moving visor STL FDM keychain printable keychain dragon articulated toy STL mini articulated animal tiny dragon print dragon fidget keychain chaveiro dragão articulado dragão miniatura STL chaveiro articulado impressão 3D dragão com capacete dragão cavaleiro STL brinquedo articulado dragão arquivo STL chaveiro miniatura dragão imprimível dragão articulado FDM chaveiro imprimível mini dragão articulado

Beskrivelse

3D MODEL DESCRIPTION A tiny dragon with a knight's visor that actually moves. It goes from cute to battle-ready in one click, and fits right on your keys. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 4 5 Minutes* (may vary according to your printer model) Multicolor - 08 Hours 11 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 2,5 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Time considering only one version, between the two available (keychain and figurine) You will need; Split Key Ring with Chain: Amazon - Aliexpress - Mercado Livre Ring Conector 12 mm: Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!