Beanie Waddle

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 12:20

Tags

articulated penguin keychain penguin STL keychain penguin with beanie STL mini penguin 3D print FDM keychain STL cute penguin keychain moving beanie STL printable penguin keychain mini articulated animal penguin fidget keychain tiny penguin print winter animal keychain STL cozy animal keychain chaveiro pinguim articulado pinguim com gorro STL mini pinguim imprimível chaveiro articulado pinguim pinguim articulado FDM gorro móvel STL brinquedo pinguim articulado arquivo STL chaveiro pinguim pinguim quentinho imprimível miniatura pinguim articulado chaveiro animal fofo

Beskrivelse

3D MODEL DESCRIPTION This little penguin comes with a knit beanie that slides down over its head. Cozy, compact, and almost too cute to leave on your backpack unnoticed. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 32 Minutes* (may vary according to your printer model) Multicolor - 06 Hours 03 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 2 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Time considering only one version, between the two available (keychain and figurine) You will need; Split Key Ring with Chain: Amazon - Aliexpress - Mercado Livre Ring Conector 12 mm: Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!