Bonehead Rex

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 12:20

Tags

articulated dinosaur keychain dinosaur STL keychain skull crown dinosaur mini dino STL dino keychain 3D print moving skull accessory STL FDM articulated keychain printable dinosaur keychain dinosaur fidget toy mini articulated animal STL tiny dino print dino skull toy Halloween keychain STL chaveiro dinossauro articulado dinossauro caveira STL mini dino imprimível chaveiro articulado FDM brinquedo dinossauro articulado dino com caveira STL arquivo STL chaveiro dinossauro chaveiro Halloween imprimível miniatura dinossauro articulado dino articulado impressão 3D

Beskrivelse

3D MODEL DESCRIPTION A cute dinosaur wearing a skull crown that slides right over its head. Equal parts adorable and eerie, it's the kind of keychain people actually ask about. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 4 2 Minutes* (may vary according to your printer model) Multicolor - 06 Hours 58 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 2 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Time considering only one version, between the two available (keychain and figurine) You will need; Split Key Ring with Chain: Amazon - Aliexpress - Mercado Livre Ring Conector 12 mm: Amazon - Aliexpress - Mercado Livre 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: Brim, only in the “Skull Mask” file. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!