Hades

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-12 21:09

Sidst set

2026-07-16 19:00

Tags

hades hades statue hades figurine greek god god of underworld cerberus three-headed dog greek mythology olympian god dark mythology villain death god trident skull 3d print statue resin figurine fdm print mythology figure greek sculpture printable figurine hades 3d model estátua hades figura hades deus grego deus do submundo cérbero cão de três cabeças mitologia grega mitologia sombria tríscele crânio escultura grega figura mitológica impressão 3d miniatura mitologia estátua resina

Beskrivelse

3D MODEL DESCRIPTION He rules where light does not reach, and his presence shows it. A dark and commanding piece for collectors who appreciate mythology with a sinister edge. - This STL file is recommended for FDM Printers! - 3D Printing Time : Multicolor - 01 Day, 23 Hours, 45 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 02 colors) - Approximately Height: 26 cm * Note : Printing time based on a Bambu P1S printer, according to our tests. ATTENTION : “ Multipart” files requires super glue. 3D PRINT SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.16 mm - Recommended Layer Height: 0.16 mm - Recommended Perimeters/ Walls: 2. - Recommended Infill (%): 5% (Gyroid) - Needs Support: Yes, (Auto Grid) if necessary, use (Painted Support) for better quality. - Build Plate Adhesion: Yes, (Brim) only on files that don't adhere well to the printing bed. - Others: Be sure your support profile is optimized for better quality. 3D FILES INCLUDED - SLA - Pre-Supported: Standard STL file version includes all supports (pre-supported). - Solid Model: You must hollow the 3D print model yourself and add the supports as you wish. - Hollow Model: You must add your own supports. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!