Modular Octagon Desktop Shelf (No Supports)

Designer

Akosika

Designer relation

Ingen

Kategori

Household > Office

Licens

Creative Commons Attribution NonCommercial ShareAlike Creative Commons — Attribution — Noncommercial — Share Alike

$ ↺ SA

Attribution påkrævet; kommerciel brug er ikke tilladt; ShareAlike gælder for afledte værker.

Designer commercial

None

Først set

2026-07-12 15:28

Sidst set

2026-07-12 20:10

Tags

shelf modular useful octagon

Beskrivelse

This is a modular, easy to build shelf designed for simple needs. Why print this? - No supports needed - Easy assembly - Big capacity - Stable Warning: This model needs proper flow/e-steps and overhang calibrations. So make sure these things are calibrated. Things you will need: - M3*4*4.2 Heat inserts (if you don't have these, don't worry, you can skip this, because you can use glue instead) - M3*5 Screws (same as before, so it not important, it's just for extra strength) - Hot glue gun or Super glue Assembly: First step: Print all the parts, you'll need. Second step: Put the frames together with the connectors. Third step: Put hot glue on the edges of the frames or put super glue between the frames. Fourth step: Glue the covers to the frame. Fifth step: Screw or glue the knob and the drawer together. Sixth step: Assemble the shelf together. Here is an another example how it should look: And... done! Happy printing!