SkadiStack | Modular Stacking Drawer System for SKADIS

Designer

SimplyHong

Designer relation

Ingen

Kategori

Household > Office

Licens

Creative Commons Attribution NonCommercial Creative Commons — Attribution — Noncommercial

$ ↺

Attribution påkrævet; kommerciel brug er ikke tilladt.

Designer commercial

None

Først set

2026-07-24 11:53

Sidst set

2026-07-24 20:41

Tags

organizer tool ikea modular stackable storage workshop pegboard skadis drawer skadisikea

Beskrivelse

Important: Bed size must be around or at least 250x250mm wide to fit the base and terminal platforms. How it works - Base platform hooks onto the Skådis pegboard using T-clips and holds a stack up to 3U wide. Each stack can be configured as 3 1U drawers , or a 1U + 2U drawers combination to suit whatever you're storing: small hardware up top, bulkier bits below. Each drawer unit (1U) is 55 x 55 x 83mm in volume. - Example shown with 3 stacks , you can go more if you have the pegboard/materials/needs - Stacking drawer modules self-align as you build. The top face of each unit has two locating grooves , and the underside of the unit above has matching tabs that drop straight in. This keeps the stack square and stops modules shifting while you open and close drawers. - Terminal (top) platform locks the stack together from above and adds a flat shelf/tray surface on top, handy for tools, parts trays, or whatever you reach for most. What's included - Base platform (Skådis-mount using T-clip) <- starts first - 1U drawer module - 2U drawer module - Terminal / top platform (Skådis-mount using T-clip) <- ends here - T-clips can be downloaded here or get from the original T-clips model ( https://www.printables.com/model/256896-skadis-t-clip-system)