Parametric Spacer for Sofas, Beds, etc.

Designer

mgm86

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-09-14 19:51

Sidst set

2026-09-14 19:51

Tags

spacer furniture spacer parametric spacer customizable spacer sofa spacer bed spacer bench spacer sofa bett bank parametric

Beskrivelse

Boost Me (for free) Thanks for your support! Boost This parametric spacer is designed to keep sofas, beds, benches and other furniture from sliding towards the wall when sitting down. The spacer features 9 adjustable parameters to fit different furniture and baseboard configurations, while the distance from the wall can be freely adjusted. Depending on the shape of the baseboard, a clearance can also be configured to ensure a proper fit. For larger spacers that exceed the size of the print bed, there is an additional two-piece version. The two parts can simply be connected after printing. A simple solution that can be adapted to different furniture and room setups. Print profiles: Both print profiles are just examples. A one-piece example and a two-piece example. One-piece is standard. You can use the two-piece variant if the spacer is bigger then your print bed. Please click on “customize” and use the generator. Customize instruction: Dimension A: Depth of the wall side Dimension B: Distance from furniture to wall Dimension C: Furniture leg width (add 2-3mm) Dimension D: Furniture leg depth (add 2-3mm) Dimension E: Width of the wall side Dimension F: Height of the furniture side Dimension G: Cutout depth (Set to 0,01mm if you don't need a cutout. At least 5mm less then Dim A) Dimension H: Cutout height (At least 5mm less then Dim I) Dimension I: Height of the wall side (Same as Dim F = No step) Print settings: 4 Walls Support is needed if you configure a cutout. Please use these settings: