Parametric Tree Ring

Designer

mgm86

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

tree ring parametric parametric ring parametric tree ring tree border tree border ring

Beskrivelse

Boost Me (for free) Thanks for your support! Boost A customizable decorative ring for young trees, shrubs, and garden plants. This modular ring helps create a clean and attractive transition between soil and decorative stones. It can be used in two different ways: Fill the ring with soil when the surrounding area is covered with decorative gravel or stones. Fill the ring with stones when the surrounding area consists of soil or mulch. The design creates a neat, professional-looking border around the tree trunk while helping to visually separate different ground coverings. Features Fully parametric design: Adjustable outer diameter, inner diameter and height Can be scaled to suit different tree and shrub sizes Consists of 4 individual segments Tool-free assembly by simply snapping the segments together Print profiles / Generator Profile A Outer diameter: 450mm Inner diameter: 150mm Height: 70mm Printable on 255x255x255mm print plates Profile B Outer diameter: 600mm Inner diameter: 200mm Height: 70mm Printable on 350x320x325mm print plates You need a different size? Please use the generator by clicking on the customize button. There you can adjust these 3 dimension freely: After generating the model, please import it into Bambu Studio. There, you’ll need to split the model into 4 separate parts. Right-click on the model: Split -> to objects. Then, please move each element to its own print plate. Assembly First, connect the two parts marked with a circle and the two parts marked with an X. Now place the two semicircles around the tree trunk and connect the two halves to form a closed circle. Note: The circles and X aren't visible in my photos. I added them later to make the assembly easier. Print settings 3 walls Outer and inner brim to prevent warping I've also added cube modifiers to reinforce the connectors with 35% infill and 4 walls. However, it should work just fine without them as well: Filament Please use filament that is resistant to heat and UV light. PETG or, ideally, ASA. I printed the ring myself using ASA.