makerworld
Honeycomb storage wall with LED (HSW)
- Designer
- MKExpert
- Designer relation
- Followed
- Kategori
- Household
- Licens
-
Creative Commons Attribution NonCommercial ShareAlike Creative Commons Attribution-Noncommercial-Share AlikeAttribution påkrævet; kommerciel brug er ikke tilladt; ShareAlike gælder for afledte værker.
- Designer commercial
- MakerWorld Commercial License
- Først set
- 2026-07-15 10:58
- Sidst set
- 2026-07-15 10:58
- Tags
Beskrivelse
Honeycomb Storage Wall with LED : Here is my version of the Honeycomb Storage Wall with a 1.4cm thick LED strip The piece is 90cm by 60cm Printing settings : - Layer height : 0.25 – 0.3 - Wall loops : 3 - Infill : 0 % - Brim type : Outer brim only Optional : Bottom surface pattern : Monotonic line All inserts are here : https://makerworld.com/en/models/22521#profileId-27457 You need : 4x « Hexagon-countersung-and-hole (2x) » 7x « Insert-countersunk » 8x « Insert-hollow-for (4x) » 11x « Cover-countersunk » Follow the instructions below for assembly and installation. Here is a video of the project : https://youtu.be/EOUkTK0voWo
Kandidatvurdering
Opdateret 2026-09-18 10:05
maybe_opportunity
Opportunity
35.6
Sub-scores
Der skal mindst to scoremålinger til før udviklingen kan vises.
Hvorfor
- Ingen aktuel trendplacering; curated/importerede snapshots giver ikke trendscore.
- Engagement score 87.8: 2,171 usage, 1,184 likes.
- License score 25: designerlicens estimerer ekstra omkostning/friktion og value-for-money; verificer altid rettigheder manuelt.
- Designerlicens value-for-money penalty: kun 17 modeller til rådighed.
- Designer er markeret som followed; relationship score 15.
- Produktmatch-signaler: storage, cover, insert.
- Safety/manual-review signaler: led strip.
- Risk score 35 trækker ned i Opportunity Score.
Relaterede modeller
Snapshots
| Tid | Rank | Usage | Likes | Hot | Design |
|---|---|---|---|---|---|
| 2026-07-15 10:58 | 17 | 2,171 | 1,184 | 84 | - |