Indoor Boomerang

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-24 11:53

Sidst set

2026-07-24 20:41

Tags

indoor boomerang soft boomerang boomerang for kids boomerang indoor boomerang boomerangs bumerangue de sala bumerangue indoor bumerangue para crianças bumerangue interno bumerangue bumerangues printable boomerang boomerang STL boomerang FDM indoor toy brinquedo para usar em casa 3D printed boomerang 3D printed toy toy STL flying toy brinquedo voador kids toy brinquedo infantil fun toy brinquedo divertido

Beskrivelse

3D MODEL DESCRIPTION Designed for indoor use, so the fun does not have to wait for good weather. Throw it inside and watch it return without breaking anything. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 35 Minutes* (may vary according to your printer model) Multicolor - 01 Hours 25 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 04 colors) - Approximately Height: 1 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. - Others: After printing, fold the three tips backward toward the table, following the boundary line. To ensure a better flight, avoid letting the fold become curved. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!