Tablet stand – print in place

Designer

mgm86

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

tablet tablet accessory tablet accessories tablet stand tablet holder ipad ipad holder tablet halter print in place foldable

Beskrivelse

Boost Me (for free) Thanks for your support! Boost A compact yet sturdy tablet stand that’s super easy to open and close with one hand. It offers the perfect viewing angle and takes up little space in a backpack when folded. This makes it ideal for schoolchildren and college students. When closed, the flap locks into place so it won’t open accidentally. Suitable for tablets with a thickness of 5 to 11 mm. The model is adjustable, so it can be customized to your specific needs. Feature Overview Compact and sturdy Only 13.5 mm thick when closed, making it perfect for your backpack Very easy to use. No more annoying searching for the right angle The tablet is held securely without wobbling The flap locks into place when closed Print profiles for different tablet thicknesses Size can be freely adjusted using the “Customize” button Tip: Add self-adhesive silicone feet to prevent the tablet from sliding on the table while in use. Profile thicknesses: Slot width: 6 mm (tablet thickness: up to 6mm) Slot width: 7 mm (tablet thickness: from 6 to 7mm) Slot width: 8 mm (tablet thickness: from 7 to 8mm) Slot width: 9 mm (tablet thickness: from 8 to 9mm) Slot width: 10 mm (tablet thickness: from 9 to 10mm) Slot width: 11 mm (tablet thickness: from 10 to 11mm) Measure your tablet and choose the profile that is 0.5–1 mm larger. This ensures that the tablet lies flat against the entire surface of the flap, not just along the top edge. Print settings: 3 Walls The thin area has been reinforced using a modifier: 25% infill and 5 solid bottom layers. If you use the generator, you can apply these settings to the entire model. Print speed for top layer: 50 mm/s Customizable Features The following parameters can be adjusted: Width: from 65 to 300 mm Depth: from 90 to 300 mm Slot width: from 5 to 11 mm Note: Width and depth are measured from the edges (see sketch). Due to the rounded edges, the total width and total depth are 3 mm bigger: Tip: If you use the tablet only in landscape mode, a depth of 100 mm is sufficient. The standard model measures 100 x 160mm (width x depth). _________________________________________ Similar version for smartphones: LINK