IKEA SKADIS Toolbox Holder (Fully Customizable)

Designer

Maxx_Design

Designer relation

Followed

Kategori

Tools

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

ikea skadis holder toolbox box custom customizable

Beskrivelse

Boost Me (for free) If you enjoy my designs, you can support my work with a boost! Boost This is a fully customizable toolbox holder for the Ikea Skadis system. They are printable without support. There are premade holders for all my Toolboxes, Cutting Module Boxes and Laser Module Boxes. Please note the premade holders will only work with Toolboxes made by Maxx Design! If you have another box, you can use the Customize Button to create your own. See the reference photo for the naming of the dimensions. All dimensions are inner dimensions of the holder. The height refers to the front edge. I recommend adding at least 1mm of clearance to the largest outside dimensions of your box. Feel free to create and share profiles for other boxes as a profiles here. Filament I recommend using PLA Basic or PETG. Please be aware special filaments like Matte or Silk PLA can have weaker layer adhesion, resulting in the hooks breaking off. Print Settings If you slice it yourself, make sure to set the wall loops count to 5. This will only influence the hooks and make sure they are massive. I recommend using a brim for most users, but you can print it without if your build plate is perfectly clean. Try at your own risk. This design is printed at a constant 45 degree overhang and requires sufficient cooling. It should work fine on all Bambu Lab printers, but on the X1 and P1 series printers you might need to keep the door open when you print PLA on a PEI build plate. More toolboxes, holders and accessories can be found here: https://makerworld.com/en/collections/10222853 Membership Get a commercial license for my designs by becoming an Authorized Seller! Join