makerworld
Wall Mount Foldable Hexagon Shelf Print In Place
- Designer
- RiverRaid
- Designer relation
- Ingen
- Kategori
- Household
- Licens
-
Creative Commons Attribution NonCommercial ShareAlike Creative Commons Attribution-Noncommercial-Share AlikeAttribution påkrævet; kommerciel brug er ikke tilladt; ShareAlike gælder for afledte værker.
- Designer commercial
- None
- Først set
- 2026-07-14 16:37
- Sidst set
- 2026-09-15 20:28
- Tags
Beskrivelse
Its designed to be printable in one piece and needs no support Mounting Video: Parts: 1)Template.stl / Template_Big.stl => use this to align the screws, screw them in the wall so that the template can be removed with a slight bit of resistance 2)Hexagon_Shelf_Foldable_PrintInPlace.stl: The shelf 2 Screws are required (M3-M4, flat head) After printing, gently "break" the joint free by pushing the ledge from the upper back to the front
Kandidatvurdering
Opdateret 2026-09-18 10:05
opportunity
Opportunity
55
Sub-scores
Hvorfor
- Ingen aktuel trendplacering; curated/importerede snapshots giver ikke trendscore.
- Engagement score 100: 11,413 usage, 4,600 likes.
- License score 50: kilden indikerer commercial/merchant mulighed; verificer altid licensvilkår manuelt.
- Kilden indeholder commercial/Patreon/merchant signal; licens skal verificeres manuelt.
- Produktmatch-signaler: storage, mount, shelf, template, wall mount, modular, wall shelf.
- Licenssignal fundet; modellen kan være en direkte mulighed, men rettigheder skal verificeres.
Relaterede modeller
Snapshots
| Tid | Rank | Usage | Likes | Hot | Design |
|---|---|---|---|---|---|
| 2026-09-15 21:21 | 0 | 11,413 | 4,600 | 0 | - |
| 2026-09-15 20:28 | 100 | 11,413 | 4,600 | 1 | - |
| 2026-07-24 11:56 | 0 | 10,854 | 4,500 | 0 | - |
| 2026-07-16 19:16 | 0 | 10,792 | 4,400 | 0 | - |
| 2026-07-16 19:13 | 0 | 10,792 | 4,400 | 0 | - |
| 2026-07-15 08:12 | 0 | 10,782 | 4,400 | 0 | - |
| 2026-07-14 19:22 | 0 | 10,773 | 4,400 | 0 | - |
| 2026-07-14 16:37 | 100 | 10,773 | 4,400 | 1 | - |