Skeleton Velociraptor

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-12 21:09

Sidst set

2026-07-12 21:09

Tags

velociraptor articulated toy toys collectible collectibles collection dino dinos dinosaur skeleton bones bone fossil fóssil esqueleto ossos osso dinossauro skeleton expedition colecao coleção colecionavel colecionável colecionaveis colecionáveis articulado brinquedo brinquedos

Beskrivelse

3D MODEL DESCRIPTION Fast, fierce, and probably plotting something. Keep an eye on this one, it’s got clever bones. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 01 Hours 26 Minutes* (may vary according to you printer model) - Approximately Height: 3 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. Note: This model has pre-supports that should be removed after printing is complete. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.16 mm - Recommended Layer Height: 0.16 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 10% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!