V3 Series - Helix Passthrough

Designer

RJ Design

Designer relation

Followed

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

Fidget v3 passthrough cone plumbob impossible fun series bambu art thread

Beskrivelse

Note: I recommend not using Silk filament for the Helix. Note 2: AMS Profiles work without AMS - It will only print the one color The Design My Latest addition to the V3 Series is here. A full height helix at 179mm (180mm causes issues) with an inner plumbob The dimensions of the Helix are approximately: 179mm x 46mm x 46mm The dimensions of the Plumbob are: 68mm x 32mm x 32mm Clicking the inner part should be fairly intuitive, but i can add images if needed. Let me know if you experience any issues. "Boosts" reward the Creators of models you like. If you like this model please consider giving it a Boost! Boost Me (for free) Never Needed, Always appreciated. Boost Printing I recommend not using Silk for the Helix. The build plate needs to be clean for good adhesion The Helix uses Variable Layer Height to ensure a good finish. Please ensure filament is relatively dry (wet filament seems to have a poor surface finish) Once printed let the build plate cool before trying to remove. 2 Print Profiles from me: Single Color Print by Part Two Color Print by Part (for A series and P/X Series) My Work After many years in Engineering, I've just decided to try and follow my childhood dream of becoming of a Creative Designer. A Creative Designer of what? No idea! Right now I really like puzzles, mechanisms and kinetic sculptures so that's where I'm going to focus my efforts. Membership If you want to sell prints of my designs, or just support me please subscribe to the commercial license. Thank you! Join Or you can join my Patreon for More Exclusive Designs here: https://www.patreon.com/RJ_Design