Large Clicky Fidget Button

Designer

KenMills

Designer relation

Followed

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

Fidget button

Beskrivelse

This large hand-sized puts a satisfying click action and durability by using steel springs and balls from the Maker's Beginner Kit. The texture handle adds grip and a tactile feel while looking great. Measurements: 95mm (~3 3/4 in.) tall and 35mm wide. Parts used: (3x) 0.5x5x25 mm Helical- Compression Spring (1x) 8mm Stainless Steel Balls Note: This model is compatible with the Maker’s Beginner Kit (B-ZC002). The kit includes various non-printed parts to support multiple designs, so some components may not be necessary for this specific model. Assembly: Insert two springs into the two holes in the bottom of the button part and one spring into the side hole. If you press each spring in fully they should snap into place to help hold them. If they don't for some reason, don't worry, just be careful to not drop them. Next add the steel ball onto the side spring and fully compress it into the hole. Keep the ball in place with a finger for the next step. Inside the button case are two triangular notches for the ball to click into. Ensure these notches are aligned with the steel ball in the button. Slide the button into the case until it bottoms out. You should feel the ball snap into place. All done!