Castle Kit Card Expansion Set

Designer

berri3D

Designer relation

Followed

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Other

Først set

2026-07-15 09:49

Sidst set

2026-07-15 09:49

Tags

kit card kit castle castle kit card card kit card kid's kit card children's kit card castle playset trees playset playset accessory

Beskrivelse

This is an EXPANSION kit card set for my Dragon + Castle Kit card. It does NOT include the castle. This set has tons of little details to add to your castle. Print it as a kit card or as separate parts. No glue or special cutting tools required* Batch print up to 2 on a plate Printable instructions below Designed and tested with care to ensure a worry-free print experience * While the parts can be snapped out with only a little bit of force, I still recommend using flush cutters or scissors to avoid breaking the delicate trees. It's quicker, safer, and easier! 🌞 ⚠️ WARNING!⚠️ Parts can break off prematurely while removing the card from the build plate unless you take a few simple and easy steps first. Use a freshly cleaned textured build plate. Let it cool completely first, then slowly and carefully flex the plate. The card should pop off easily if it hasn't already self-released. Easy peasy, I promise! 🚩 Before You Print 🚩 Just a few common sense things to be aware of: Small parts, choking hazard, keep away from babies/pets/cranky adults This is a miniature and not suitable for everyone Clean build plate is a MUST Textured build plate recommended ("blue" or high tack plates may break cards upon removal) Fit differs between printers and filaments; always do a test print before gifting or batch printing. Flush cutters or scissors highly recommended to remove parts from card. Don't want to use tools? Print as separate pieces instead. Troubles? Please see any of my other kit card models for tips and tricks. Why not here? Because I'm working on a universal resource guide so I don't keep repeating myself :) The following instructions are also available as a downloadable PDF. Please see the “Documentation” section below ⬇️ Print Details Process Settings This model has been optimized specifically for: Nozzle: 0.4mm Layer height: 0.2mm Wall generator: classic All my 3mfs include these values in addition to other settings I've developed over the years to ensure the best possible result. Changing these values may result in parts not fitting or small details printing incorrectly. Suggested Filaments For this model, I recommend basic PLA. Test prints were made using the filaments listed in the Build of Materials using default profiles on a Bambu X1C. All parts were found to have a good fit between parts. Your results may differ due to filament colour/type/brand, and printer. About It was wouldn't be a “berri3D" model without a bit of historical trivia thrown in. The tree that's pictured in the instructions is from “A Complete Guide to Heraldry." This book of heraldic designs by Arthur Charles Fox-Davies was published in 1909 and was illustrated by Graham “Herald Painter to the Lyon Court” Johnston. I really just wanted a nice looking tree to put on the banner but instead fell down a rabbit hole bedecked with heraldic designs. 🥰 How to Support me If you appreciate the work I did to bring this model to you, please consider supporting me on Ko-fi. Even a small tip will help offset the cost of prototyping filaments. Alternatively, a like or a boost is another easy way to say “hey, you don't entirely suck.” ⭐ Licensing If you wish to sell my models, you may purchase licensing rights through my official Ko-fi page. This model is shared using my own Personal-Use License which supplements (but does not replace) MakerWorld’s Standard Digital License. My license is fundamentally the same (no public remixes, no file sharing, no selling) but includes specific exceptions and allowances not covered by the Standard Digital License. Licenses offered through third-party websites (e.g. Cubee3D) are not authorized and are not valid. Boost Me (for free) 🚀= 💪🐹 👍 = 🦵🐹 My models are created on a smoking hot Compy386 powered by Hunrod the Unusually Swole Hamster™. Every boost and like makes Hunrod stronger. Boost