Round Side End Table

Designer

Josheh_3D

Designer relation

Ingen

Kategori

Household

Licens

Creative Commons Attribution NonCommercial Creative Commons Attribution-Noncommercial

$ ↺

Attribution påkrævet; kommerciel brug er ikke tilladt.

Designer commercial

Patreon

Først set

2026-07-14 16:37

Sidst set

2026-07-14 16:37

Tags

table sidetable side table furniture home homefurniture end end table small table endtable

Beskrivelse

Boost Me (for free) These models can be a lot of work, so please consider giving a boost to help further the development of models like this, and many more! Also, don't forget to follow me for more work like this too! Boost [Introduction] A 3d printable end table! What's not to love? Based on a somewhat commonish design, I wanted to adhear to it as closely as I could. Because of the nature of plastic, this does introduce a little extra wiggle, but overall in practical use, it has served to be a study side table for my uses. The first prototype I printed survived a cat body slamming it multiple times! I'd recommend printing it out of PETG, or another higher strength material, like ABS or PLA+. One of the sample models I did was produced with Bambu's PLA Silk, which looks nice, but I'm not sure how strong it'll hold up as even compared to regular PLA, it tends to split a little easier. It'll use about 1.5-2kg of filament. Split evenly between the top and legs/frame. [Hardware & Filament] Featured Filaments: Bambu PLA Silk Gold Bambu PLA Matte Ivory White Bambu PETG-HF Black Bambu PETG-HF Gray Hardware: (Full disclosure, I am part of the Amazon Affiliate Program. All amazon links are affiliate links. I earn a small commission from these links without any added cost to you. These links help to support me so I can bring more content for free! I use screws from Bambu's Makersupply, and mainly design around those. However, you can purchase self tapping screws from amazon if that's easier for you. I'd recommend an assortment like this Amazon US which includes the sizes needed, plus additional screws you can use on other projects from me!) 23x BT3x8mm Self Tapping Screws 6x BT3x30mm Self Tapping Screws (You can use as short as 20mm, but recommended is the full length 30mm) Optional: Glue (For added strength, you could apply glue to all mating surfaces before attaching everything together with screws) [Assembly] Assemble the main top. The dowels should be snug, but not difficult. Their main use is to help keep everything aligned. Use the letters on the bottom to help align the pieces in the correct oreder. Assemble the base frame using 9 m3x8mm self tapping screws. Pay attention to the numbers on the fins and make sure they match Screw the frame to the top using 14 m3x8mm self tapping screws. Use the letters on the frame and table top as a guide to help orientate the frame correctly. Screw the 3 legs on using 2 M3x30mm screws for each leg. 6 Total. You can use as short as 20mm screws, but the full length 30mm is recommended. ------- If you like my work, consider showing your love by Buying me a coffee. Additionally, if you're looking to sell prints of my design, please check out my Patreon page for more information. Additionally, you can follow me on Youtube for videos covering some of my models, and Instagram.