Kevin the snail

Designer

Enique3d

Designer relation

Subscribed

Kategori

Outdoor & Garden

Licens

Ukendt Ikke mappet til Scout licenskatalog

Designer commercial

Patreon

Først set

2026-07-10 21:40

Sidst set

2026-07-19 08:55

Tags

Functional part kevin snail xl garden ornament cute slime large parts yard

Beskrivelse

Kevin the snail. In just one size, scale up or down as you wish, if sailing down you may need the scale the connectors 1-3% further. Prints in parts and designed as a garden ornament. A fairly simple build with just a few connectors. the two halves of the body slot together with 2 connectors. The shell connects using 4 connectors in the now build main body. each eye uses one connector, pleases make sure you know the left and the right as they are different. then insert each eye part again making sure you know the left and right as they are slightly different. outer white, eye colour, eye black and eye reflection the tongue just slots in and the teeth into the upper mouth, bothe require glue When i refer to left and right its as if you are the snail. 0.2 layer, 5-15% infill, does require some supports. the setting are all set in the 3MF