Fast Strong Automatic Respooler V3 (1–3 kg Spools)

Designer

Tomik s Cuprou

Designer relation

Ingen

Kategori

3D Printer

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

None

Først set

2026-09-17 04:00

Sidst set

2026-09-17 04:00

Tags

spool spooler respooler winder rewinder hex drill easy strong fast fast print bambu bambulab modern turning low amount of filament Holder

Beskrivelse

🌀 Fast Strong Automatic Respooler V3 (1–3 kg Spools) ✨ This version has been completely redesigned for easier printing and fewer supports. What's new: No more lifting spools: The spool will never lift off while using the hand crank, thanks to a completely redesigned mounting system for both spools. Please watch the instructional videos to better understand how to assemble the respooler and avoid any issues. Improved brake screw: The geometry of the brake screw has been modified for smoother and easier operation. Redesigned spool holder pins: The pins now slide in and out much more easily. If you still find them fitting too tightly before assembly, lightly sand them down with sandpaper. Unfortunately, this cannot be fully avoided due to differences in printer calibrations. Significantly fewer supports: Requires far fewer supports compared to previous versions. ✨ Key Features: 🎯 Fully Automatic Filament Leveling: Evenly guides and lays the filament side-to-side across the target spool with zero manual effort. 🛑 Friction Brake Screw on Donor Spool: Prevents the donor spool from freewheeling/over-spinning and creating tangles when you pause or stop rewinding. 🔩 Standard Hex Bit Drive: Replaced the dedicated drill pin with a universal hex slot — now easily driven by any standard electric screwdriver, drill bit, or the included manual crank handle. ♻️ 100% 3D Printable (Zero Non-Printed Hardware): No bearings, metal rods, or screws needed! The only non-printed item required is a short piece of standard PTFE tube for the filament guide. 🔄 Backwards Compatible: If you’ve already printed my previous version, you only need to print the updated/diff parts! The core components remain fully compatible. 🔗 3 kg Spool Expansion Link To complete the 3 kg spool setup, print the adapter included in the files and use it with this spool holder: 👉 https://makerworld.com/en/models/531126-3kg-liao-pan-jia-filament-spool-holder-up-to-3kg#profileId-447954 🛠️ Hardware & Bill of Materials (BOM): 3D Printed Parts (all included in the print profiles) 3× Short piece of standard PTFE tube (approx. 3–5 cm) 🖨️ Recommended Print Settings: Material: PETG / PLA / ABS / ASA (PETG or better recommended for gears and axles) Layer Height: 0.24 mm Walls / Perimeters: 2 or more Infill: 10% Gyroid Supports: Only where specified in the print profile 🙏 Credits & Attribution: A big shoutout and huge thanks to KYZ Design! Some parts, including the gear mechanism, were adapted and remixed from the fantastic PASTA lite Receiver project. Thank you for the inspiration and great engineering! Happy printing & smooth respooling! If you like this model, please consider leaving a like (👍), rating (⭐), or sharing your print in the comments!