Bleach-Inspired Hollow Mask Emblem Keychain

Designer

yukiLo_3d

Designer relation

Ingen

Kategori

3D Printers > Accessories

Licens

Creative Commons Attribution Creative Commons — Attribution

$ ↺

Attribution påkrævet.

Designer commercial

None

Først set

2026-09-17 00:10

Sidst set

2026-09-17 00:10

Tags

easy cool accessory keychain nosupport keychains accesories bleach

Beskrivelse

Model Details: This is a 3D printable model of the Hollow mask symbol from Bleach . I designed it from scratch with clean geometry, ensuring the walls and details are thick enough for strong, reliable FDM printing. Key Features: - Iconic Design: Instantly recognizable Hollow mask emblem. - Keychain Ready: Includes an integrated loop at the top for a standard keyring or jump ring. - Optimized Scale: Pre-sized to approximately 45mm wide, striking the perfect balance between detail and pocket-friendly size. - No Supports Needed: Designed to print flat on the bed, requiring no support material. Printing Recommendations: - Material: PLA, PETG, or ABS are all suitable. PLA is perfect for beginners. - Layer Height: 0.2mm for a balance of speed and quality. For finer detail on smaller features, 0.16mm or 0.12mm can be used. - Infill: 15% to 20% (e.g., Gyroid or Grid) is sufficient for a solid keychain. - Walls/Perimeters: At least 3 walls (3 perimeters) are recommended to make the outer shell, the keyring loop, and the fine teeth details strong. - First Layer: Ensure a good first layer adhesion; a brim is optional but helpful for stability.