Playseat Trophy - Logitech Pro Shifter Mount

Designer

Designsmith

Designer relation

Followed

Kategori

Tools

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-09-16 02:45

Sidst set

2026-09-16 02:45

Tags

hook organizer box stand bracket gradient ams lamp toy fidget holder mount storage

Beskrivelse

Membership Subscribe if you want to support me Join Close-Position Shifter Mount for Logitech G PRO (Playseat Trophy) Get your shifter closer to the action! This custom-designed mounting bracket is built specifically for the Playseat Trophy combined with the Logitech G PRO Racing Wheel & Shifter. If you find the standard mounting options place the shifter too far back or out of reach, this bracket brings the Logitech Pro Shifter up close and tight to the wheel base for a more realistic, rally- and GT-friendly ergonomic layout. ⚠️ Important Fitment Note Because this mount positions the shifter tightly against the wheel base, it is custom-tailored to a specific driving position. It will only align correctly if your Logitech G PRO wheel is mounted in the exact same physical position and angle as mine. Recommended Prototyping Workflow: Print a Test Draft First: We strongly recommend printing the first version in a lightweight, fast profile (e.g., low infill, lower perimeters) just as a mockup. Verify Alignment: Bolt it on to check if the reach and wheel position match your personal rig setup. Print Final & Solid: Once confirmed, print your final version using robust settings for zero-flex performance during intense shifting. Recommended Print Settings (For Final Version) To handle heavy shifting forces without flexing or cracking, use these settings for your final production print: Material: PETG or ABS/ASA (PLA works for testing, but higher-grade filaments handle the mechanical stress much better). Perimeters/Walls: 4 to 5 walls for maximum structural rigidity around mounting holes. Infill: 25% – 40% (Gyroid or 3D Honeycomb recommended for balanced strength). Supports: Minimal supports may be required depending on your print orientation (check slicer preview). Bolt in, dial in your shifting position, and enjoy a much more immersive setup! Boost Me (for free) If you like me design, please give me a boost! Boost