Sliding Poop Chute for Bambulab X2D/P2S | 2 Sizes

Designer

CE_YT

Designer relation

Followed

Kategori

3D Printer

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

MakerWorld Commercial License

Først set

2026-07-24 11:54

Sidst set

2026-07-24 11:54

Tags

sliding poop chute bbl x2d p2s hanging sizes quick release small large hang clearance holes bolt original upgrade

Beskrivelse

This poop chute is designed to make collecting and emptying filament waste quick and convenient. The system consists of a Small and a Large poop chute, both using the same mounting system, so you can easily choose the size that best fits your setup. Installation only takes a minute: Remove the original screw underneath the stock poop chute. Place the printed Bolt Cap over the mounting point. Reinstall the original screw. Simply slide either the Small or Large poop chute onto the Bolt Cap. No permanent modifications to the printer are required, and you can swap between both sizes whenever you like. Available in Small and Large versions. Quick slide-on / slide-off installation. Uses the original mounting screw. Viewing slots on both sides let you easily see how full the container is, so you'll know exactly when it's time to empty it. The smooth interior allows the filament "poops" to fall out effortlessly. Simply slide the chute off, turn it upside down, and everything empties without having to shake or reach inside. If you'd like to see the installation process in more detail, I also featured this model in my "17 Must-Have Upgrades for the Bambu Lab X2D" video, where I demonstrate the installation step by step alongside sixteen other useful X2D upgrades: Boost Me (for free) If you find it useful, I'd really appreciate a boost! Boost