Player Pack - Turkish Angora

Designer

STLFLIX

Designer relation

Ingen

Kategori

Subscription Library

Licens

STLFLIX Subscription Ikke mappet til Scout licenskatalog

Designer commercial

STLFLIX Subscription

Først set

2026-07-18 10:18

Sidst set

2026-07-18 10:20

Tags

catpacks backpack backpacks cat kitty kitten gato gatinho gatinhos collectible collectibles collection colecao coleção colecionavel colecionável colecionaveis colecionáveis articulated toy toys articulado brinquedo brinquedos bauble head turkish angora angorá

Beskrivelse

3D MODEL DESCRIPTION Fast paws, sharp reflexes, and fully locked in. This one didn’t come to nap, it came to win… or at least pretend it did. - This STL file is recommended for FDM Printers! - 3D Printing Time : Monocolor - 01 Hours 44 Minutes* (may vary according to your printer model) Multicolor - 07 Hours 22 Minutes* (may vary according to your printer model and the amount of colors in your AMS, in this print we’ve used 07 colors) - Approximately Height: 6 cm * Note : Printing time based on a Bambu P1s printer, according to our tests. And consider the set, the cat and the backpack. You Will Need: Split Key Ring with Chain - AliExpress - Amazon - Mercado Livre Ring Conector 12 mm - AliExpress - Amazon - Mercado Livre Note: These links are purchase suggestions, and are products similar to those we use in our development and testing. Variations may occur. Pay attention to the measurements indicated and/or assembly instructions to ensure correct fitting. 3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE) - Line Width/ Nozzle: 0.4 mm - First Layer Line Width: 0.48 mm / 120% - Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab) - Recommended Initial Layer Height: 0.2 mm - Recommended Layer Height: 0.2 mm - Recommended Perimeters/ Walls: 3. - Recommended Infill (%): 5% (Gyroid) - Needs Support: No. - Build Plate Adhesion: No. The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences. Happy Printing!