KPop Demon Hunters - Poster

Designer

C3D

Designer relation

Followed

Kategori

Art

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-17 10:32

Sidst set

2026-07-17 10:32

Tags

hueforge hue forge painting filamentpainting filament painting 2d 2dart 2d art 2d3d 2d 3d 2d3dart 2d 3d art art picture homedecor walldecor artwork drawing illustration paint artoftheday digitalart 3dart kpop demon hunters kpop demonhunters demon hunter netflix

Beskrivelse

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: Or Subscribe for a commercial License Directly in Maker World: Membership C3D Commercial Membership - Authorized Merchant Join This poster was requested by my girlfriend and I had to oblige! It turned out absolutely lovely. The pictures do not showcase it as well but it has an its own purple frame. IMPORTANT: When the print pauses automatically almost at the end of the pink color, swap the Black roll with White and the Purple roll with Yellow - For more information please read the explanation after the description. USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Jayo Black Transmission Distance: 0.3 / Amazon PLA BambuLab Indigo Purple Transmission Distance: 0.8 PLA KINGROON Sky Blue Transmission Distance: 2.6 / Amazon PLA Jayo Pink HS Transmission Distance: 4.8 / Amazon PLA Jayo Matte White Transmission Distance: 4.2 / Amazon PLA EryOne Mango Yellow Transmission Distance: 4.8 / Amazon Color Pallete: Swap Instructions: Start with Black At layer #14 (1.2mm) swap to Indigo Purple At layer #19 (1.6mm) swap to Sky Blue At layer #23 (1.92mm) swap to Pink HS At layer #33 (2.72mm) swap to Matte White At layer #40 (3.28mm) swap to Mango Yellow for the rest. Boost Me (for free) If you enjoy my work and want to support me boost this model in show of support! Every single boost puts a smile on my face and is greatly appreciated! 🤜🤛 Boost How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO Drop me a follow!🤜🤛