Winter Haven - Christmas Bauble Ornament

Designer

C3D

Designer relation

Followed

Kategori

Art

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-17 10:32

Sidst set

2026-07-17 10:32

Tags

holidaydecor natal christmascookiess christmasmagic homedecor christmasdecorating christmasornaments xmastree christmasday christmasgift lights tree gift art winterwonderland christmasparty christmasdecoration tistheseason christmascheer gifts snowman festive christmaslove ornaments decoration house

Beskrivelse

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: Or Subscribe for a commercial License Directly in Maker World: Membership C3D Commercial Membership - Authorized Merchant Join Step into a winter wonderland with Winter Haven ❄️🌲🏠, a serene ornament that captures the magic of a snow-covered cabin glowing warmly against the chilly night. From the softly illuminated windows to the frosted evergreens surrounding it, this piece brings to life the peacefulness of a quiet winter evening. The snowy textures and delicate details make it feel like you could walk right into this cozy retreat by the fire. Perfect for adding a touch of warmth and nostalgia to your Christmas tree or holiday decor! 🌨️✨🌲 6 and 4 Color Versions - Pick the prefered prepared Profile Two Ornament sizes 160mm(BIG) and 120mm(SMALL) - Pick the correct plate when slicing the file. For best results use 0.2 nozzle if possible, but 0.4 is also works great (The pictures show a model printed with a 0.4 nozzle) The design allows for printing with simple color changes at layer, which saves a lot of filament! USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Kingroon Black Transmission Distance: 0.4 / Amazon PLA Jayo Gray Transmission Distance: 2.1 / Amazon PLA Kingroon Gray Transmission Distance: 2.4 / Amazon PLA Geetech Matte Light Gray Transmission Distance: 0.7 / Amazon PLA Kingroon White Transmission Distance: 6.9 / Amazon PLA Kingroon Orange Transmission Distance: 4.5 / Amazon Color Pallete (6 Color Version): Color Pallete (4 Color Version): Swap Instructions(6 Color Version): Start with Black At layer #16 (1.37mm) swap to Dark Gray At layer #21 (1.77mm) swap to Gray At layer #26 (2.17mm) swap to Light Gray At layer #29 (2.41mm) swap to WHITE At layer #35 (2.89mm) swap to Orange for the rest. Swap Instructions(4 Color Version): Start with Black At layer #16 (1.37mm) swap to Dark Gray At layer #22 (1.85mm) swap to WHITE At layer #35 (2.89mm) swap to Orange for the rest. Boost Me (for free) Enjoying this model? Give it a boost! 🌟 Your support helps my creations reach more makers—thank you for keeping the magic alive! ✨🚀 Boost How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! YOU CAN PLACE A PAUSE ON THE LAST LAYER OF COLOR 4 TO AVOID HAVING TO BABYSIT THE PRINTER. ONCE PAUSED CHANGE 1-2-3 WITH 5-6-7 AND RESUME. IF YOU NEED MULTIPLE PAUSES YOU CAN DO THAT TOO Drop me a follow!🤜🤛