Moduluma - Modular Vase Big

Designer

ModularMapping

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

led lamp light

Beskrivelse

This is the Modular Vase Big of the Moduluma Lamp Ecosystem! The Moduluma Ecosystem is a modular lamp system where every part — vases, shades, inlays, and leaf elements — can be combined to create unique lamp designs. Each component is interchangeable, allowing countless variations while keeping the build simple and entirely tool-free. The Modular Vase Big is the larger version of the Modular Vase, designed to provide extra presence and support for bigger builds. It works with its own set of inlays (not interchangeable with the smaller Modular Vase) and offers the same flexibility with shades and fixtures. How to Print: Print the plate as it is. Make sure you use the correct inserts for Modular Vase Big (do not use the inserts for the smaller Modular Vase). Choose the lamp fixture variant you need: there are separate print plates for E14, E27, and Bambu Lab LED Kit. The included clips will connect your chosen shade securely to the vase. How to Build Your Lamp: Print all the parts you need for your build: One Modular Vase Big + Clips Inserts for the Modular Vase Big (if using inlays) Lampshade of your choice Leafs for modular lampshades (if using a modular shade) Then assemble the lamp as follows: Prepare the Vase: Press-fit the inserts into the Modular Vase Big. As many inlay parts are mirrored, insert them all the same way (either with the print-plate side facing out or facing in) to achieve a consistent pattern. Add the Clips: Press-fit the clips into the top side of the vase. These clips will later secure your chosen lampshade. Insert the Fixture: Install your chosen lamp fixture (E14, E27, or the Bambu Lab LED Kit) into the vase. Build the Shade: For modular shades, press-fit the bottom clip through the bottom ring into the first spline, then press the top clip through the top ring into the first spline. Continue alternately attaching even and odd splines until the shade is complete. Finally, press-fit the decorative leaf elements into their slots, pressing them downward for the easiest assembly. Connect Shade and Vase: Align the shade above the vase and press it onto the clips. If the fit is tight, press down carefully in sections around the lamp until it is fully seated. Finish: Position the cable neatly into the bottom slot of the vase. Your lamp with the Modular Vase Big is ready! If you have any questions or run into issues, don’t hesitate to reach out — I’ll be happy to help.