Beach umbrella table tray + pole fastener

Designer

mgm86

Designer relation

Followed

Kategori

Tools

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

beach beach umbrella parasol tablett table tray parasol table parasol table tray beach umbrella table tray sun umbrella

Beskrivelse

Boost Me (for free) Thanks for your support! Boost To store your drinks or accessories on the beach, in the garden or on the balcony and keep them cool. Features: - 4 bottle holders with a diameter of 85mm - Attachable frames in 2 different heights - 4 hooks for bags, towels or clothes - Fastener for mounting in your favorite hight. Or place it on the sun umbrella clutch. - The diameter (for the pole) of the table tray is Ø38,7mm for Ø38mm poles. If you have a smaller pole than you can screw in one of 4 adapter for poles in 19, 22, 25 and 32mm. Do you have a different diameter? Write it in the comments! Should be printed in PETG or ASA! Assembly instructions for the table tray: - Just push the frames in the holes. Add some glue if needed. Assembly instructions for the fastener: - You need 2x M8 Nuts and 1x M8 screw with hexagon head in a length of minimum 65mm. - Assemble the screw handle. Add some glue if needed. - Put the first M8 Nut in the first opening and screw in the screw a little bit. - Then add some super glue on the thread from the second nut and screw in the M8 screw. - After that you could apply anti-slip tape to increase the grip and protect the paint from the pole.