Target for rubberband guns, disc shooter etc

Designer

mgm86

Designer relation

Followed

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

shooting shooting practice shooting target target rubber band pistol nerf disc disc shooter soft air shoot gun

Beskrivelse

Boost Me (for free) Thanks for your support! Boost Improve your shooting skills with these nice targets with swivel mechanism. They work well with rubber band guns and disc shooters. I have not tested them with Nerf guns, soft air pistols etc. Assembly: Mount the Arm on the left holder wit axis. The arm must rotate completely free. Mount the right Arm holder Press these 3 parts on the ground plate Attach the disc. I recommend a drop of glue for it. Print Settings: If you don’t use the Print Profiles: See the 3D Preview for correct part alignment on the print plate. You need no supports, no brim. Standard settings with 0,2mm layer height. For dual color disc: Add a filament change at layer 5 (when using 0,2mm layer height). The disc diameter is Ø50mm. Scaling should be possible in a little range. Try at first the arm and the holder part with axis. If the joint works freely, the rest should be no problem to assemble. I also tried a version with three targets on one large base plate, but I had too many problems with more than one target falling over. So if you want more than one target on one plate, I would recommend gluing them to a wooden board. It should work much better because of the weight.