Arabic Lantern - LED Lamp / Tea Light

Designer

Maxx_Design

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

Arabic tea light tea light lantern oriental moroccan

Beskrivelse

Boost Me (for free) If you enjoy my designs, you can support my work with a boost! Boost A full size lantern, inspired by traditional Arabic geometric design, casting intricate patterns of warm light. This lantern was designed for perfect printability without the need of supports or special settings. It fits tea lights with a diameter of up to 40mm and a height between 17 and 27mm. You can either use tea lights with a diameter of up to 40mm and a height between 17 and 27mm or the RGBW Puck Lights sold by Bambu Lab. There are two sizes available, a medium sized with a total height of about ~19cm (A1 Mini compatible) or the large size with a total height of ~27cm (requires an A1, P/X1 or H2D). Disclaimer: This design can not be used with real candle tea lights! Printing No special settings or support are required for printing. It's best to print the body with 3+ outer layers. This will not consume more filament, just ensure all overhangs are straight lines and the hanger is stronger. Assembly Assembly is very easy. Simply put the tea light or puck light into the base. If you are using the tea light, secure it with the holder. Now click the upper part into the base and you are done. There is a mini version of this lantern which can be found in my Mini Lantern Collection! https://makerworld.com/en/collections/5446140-mini-lanterns Commercial license available on MakerWorld and Patreon. Membership Get a commercial license for my designs by becoming an Authorized Seller! Join