Mini Easter Bunny Tea Light Ornament

Designer

Maxx_Design

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 10:58

Sidst set

2026-07-15 10:58

Tags

mini bunny easter ornament tea light tealight rabbit tea light

Beskrivelse

Boost Me (for free) If you enjoy my designs, you can support my work with a boost! Boost These charming mini bunny ornaments bring the joyful spirit of Easter to life. Whether displayed on a stand or used as festive decorations, they add a warm glow and a touch of springtime charm to your home. These ornaments were designed for perfect printability - Prints without AMS and almost completely without support (less than 0.5g supports needed). The parts simply click and screw into each other, no glue or screws needed. They fit standard electric tea lights with a diameter of up to 40mm and main body heights between 17-27mm. Switch, battery or charging port can be reached from the bottom without disassembly. There is a version with and without bow - Both can be printed with and without hanger. The stand is included in both profiles. Disclaimer: This design can only be used with electric tea lights. Don't use real candles! Printing My profiles are all ready to print and include all necessary settings. The following notes are only for those who want to slice it themselves. You should print this with 0.16mm layer height to achieve clean threads and a smooth finish. Some parts should be printed with a brim, bow1.stl needs a tree support (disable “remove small overhangs”). A1 users: Since the A1 series have no aux fan, cooling must be increased for the bow. I increased the fan speed and lowered the minimum print speed for better cooling in the filament profile. Do not change the filament profile or apply these changes manually. For other users: If you have troubles with the bow, try moving it closer to the aux fan or reduce printing speed. I tested it with Bambu Lab PLA on all Bambu Printers. Assembly Click the adapter piece into the base as shown in the picture. Put an electric tea light inside and secure it with the threaded holder. To assemble the bow, make sure to align the flat part of the pin and carefully press both parts together until they click together. Be careful not to press against the ribbons. Now you can simply screw all parts together. Check out my full Easter collection! https://makerworld.com/en/collections/5054880-easter-decoration Commercial license available on Patreon and MakerWorld! Membership Get a commercial license for my designs by becoming an Authorized Seller! Join