gradiz • lamp

Designer

h3li0

Designer relation

Followed

Kategori

Household

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Patreon

Først set

2026-07-15 09:49

Sidst set

2026-07-15 09:49

Tags

lamp shade livingroom lighting decor homedecor modern minimalist assembly pattern design h3li0

Beskrivelse

gradiz · lamp modern minimalist table lamp, designed with a modular assembly approach for both style and functionality. Assembly is simple and intuitive: Thread the power cable through the lamp body, allowing the plug to exit from the bottom. Secure the light socket fixture into the connector. Twist-lock the connector into the lamp body for a snug fit. Route the power cable through the channel Finally, place the shade over the connector, and rotate until the tabs are inside the connector slots This modular design not only makes assembly effortless but also offers versatility and a clean aesthetic perfect for any modern interior. It includes two connector options, for either a 30mm or 40mm diameter kits (E14 or E27) important · make sure that: filament should be dry and calibrated so that it deals appropriately with printing the patterns build plate must be properly clean so that there aren't adhesions issues and lifts during the print this design is optimised to print the shade with a 0.8 nozzle, which is highly recommended, it can potentially also be printed with a .6 nozzle (increasing the default layer width), but don't recommend printing the shade with a 0.4 nozzle as it is designed to be printed in vase mode and require a higher layer width this lamp is provided “as‑is.” users are solely responsible for ensuring that the final build is safe, complies with local electrical codes, and is used in a manner consistent with their own risk tolerance. use this design at your own risk. no liability is accepted for any damage or injury ~ dimensions in mm lamp ~ x:161 · y:161 · z:153 connectors ~ x:200 · y:200 · z:5 shade ~ x:226 · y:226 · z:149 photos show printed in PLA Marble and PETG-HF lamp settings PLA Marble .40mm nozzle variable layer height 15% adaptive cubic infill connector settings (2 inner diamenter options) PETG-HF .40mm nozzle .2 layer height 15% adaptive cubic infill shade settings PETG-HF .80mm nozzle spiral vase mode .40mm layer height 1 mm line width notes commercial licence membership available on my patreon all photos uploaded are of the actual printed model, and are copyright protected if you enjoy this model please consider to buy me a coffee includes bambu studio 3mf files and STLs follow me on instagram to stay updated on new releases • h3li0.design Boost Me (for free) if you enjoy the design, please consider giving it a boost :) Boost