Slippery Egg Fidget

Designer

3DPmom

Designer relation

Followed

Kategori

Toys & Games

Licens

Standard Digital File License

$ ↺

Se platformens konkrete vilkår.

Designer commercial

Other

Først set

2026-07-15 09:49

Sidst set

2026-07-15 09:49

Tags

Egg egg fidget easter egg twist print in place articulated easter 3dpmom exclusive ball fidget ball easter2026 bunny slippery egg fidget

Beskrivelse

On a fidget fun scale of 0-10, this Slippery Egg Fidget might just be a 10 🤩 It's super smooth and satisfying. Hard to put down but also sometimes hard to hold on to 🥚😂 Dimensions of Slippery Egg Fidget: approx. 3 in. x 2 ½ in. This is my original design (not revised) inspired by the Twisty Ball Fidget by Coffey Manufactury. I thought an egg shaped version would be fun for Easter 🥚 Check out his model here 👉 https://bit.ly/3M4e2Sc Boost Me (for free) Boost Basic PLA works great (you can also use PLA Silk or PLA Matte but I recommend you reduce the outer wall speed to 50mm/s & inner wall speed to 100mm/s) 0.20mm Layer Height Infill 0% No Supports I have including the following 3mf Project File: Print Plate #1 Slippery Egg Fidget (settings for Basic PLA): one color, Arachne wall generator selected, 0% Infill Print Plate #2 Slippery Egg Fidget (settings for Silk PLA or Matte PLA): one color, Arachne wall generator selected, 0% Infill, Out Wall Speed 50 mm/s & Inner Wall Speed 100 mm/s Please note: The Slippery Egg Fidget on Print Plate #1 and #2 are the same - but plate #1 has settings for printing the Egg in Basic PLA and plate #2 has settings set for printing the Egg in Silk PLA or Matte PLA. I slowed down the wall speeds for the Silk and Matte PLA’s for a smoother finish and better articulation/movement:) Also, ensure your print plates are clean and your filament dry for the best adhesion and print quality. You can also use a little glue on the printbed for added grip 💪 My designs are free for personal and non-commercial use. I offer a commercial license on Thangs. Here is a link if you'd like to check it out 👉 https://thangs.com/designer/3DPmom If you like my work and want to help support it, you can buy me a Diet Coke at https://www.buymeacoffee.com/3dpmom Thanks so much! Have fun printing!! Erin